Bob meets Jason Hill from New England Classic as their ready-measured and pre-cut paneling system is installed in the Manhattan Brownstone. This flat-panel classic American design is modeled after the Arts and Craft style made popular in the late 1800s. This paneling is made of medium-density fiberboard (MDF) faced with a wood veneer. New England Classic offers Oak, Maple, Cherry, paint-grade wood, or a variety of standard finishes. The entire system is designed as a kit of parts that is custom fitted to the customer's space and style. Customers can go the the Web site and download design forms that gather the measurements and product specifics for the job. An in-house design team then creates a design, an installation plan, and a materials list. Once on-site the system is easy to assemble. First the center of the room is determined and marked, then the baseboard is set and leveled. The first panel is then centered on the line marking the center of the room. Panel adhesive is used on the back of each 3/8-inch panel to hold it in place and keep it off the wall enough to push it into the slot of the rabetted stile. The panel is then tapped into place and check for level. A top rail is slash cut along the edge before being installed with adhesive and nailed in place along the bead. A top cap completes the installation, and gives this panel a true 1890s feel.

Bob joins David Ives who is installing the farm grown mahogany paneling in the master bedroom closet.

Bob checks in on the finish carpenters who are installing wall paneling in the entranceway. They are using a medium density overlay (MDO) and 1/2 inch poplar slats to create the recessed panels. Bob also shows off the finished second floor bathroom tile and the repaired windows.