A lock is a door fastener that is operated by a key or knob. A latch is a device that holds the door closed. A door knob releases a door latch. A hinge allows an attached door to swing. Together these devices open, close, and secure doors.

Jump To: How To Library » Doors » Door Hardware

A new wood door will require a new lockset. Simple tools and accurate measurements make installing your own lockset an easy job. Step 1: Mark the position for the new lockset Remove the old striker plate and install the new one that came with the lockset.

Jump To: How To Library » Doors » Door Hardware

The Schlage lock set was chosen for its quality as well as ease of use for this handicapped accessible unit.

Jump To: How To Library » Doors » Door Hardware

…door or entry. Brushed nickel and oil rubbed finishes are becoming particularly popular for lock and handle sets for door hardware. Priscilla Castellano, design consultant for Andrea Lauren Elegant Interiors in Tampa, Fla., says, "It…

Jump To: How To Library » Doors » Miscellaneous Doors

Garage Door Systems, Springs, and Openers A garage door system includes the door, hardware, track, roller, springs, opener, and necessary safety devices. Contrary to popular belief, a garage door opener doesn…

Jump To: How To Library » Garage

…width may be adequate, particularly when a bathroom door location allows a straight wheelchair approach. Bathroom door hardware should be easy to operate. Special care should be exercised in selecting hardware for pocket doors. Recessed hardware…

Jump To: How To Library » Accessibility

…Unassembled, the door frame installation can be handled by a single person. The final assembly involves attaching the door hardware and latch mechanism. New Construction The typical basement foundation is nine-feet deep, so stairs are a…

Jump To: How To Library » Basement, Foundation & Crawlspace » Basement

Have large 8ft.sliding glass patio door, need new handle assembly,can not find any that will work at local hrdwre.stores. may also need roller parts? can anyone assist me?

Jump To: Bulletin Board » Doors and Windows

I am putting a door in a hallway and due to lack of "swing" space I would like to cut my 6 panel solid door down the middle and make a "mini" french door.

Jump To: Bulletin Board » Doors and Windows

I was looking for the same information and found it here. Hope this helps. Karl http://www.homehardwarefast.com/Door-Knobs-Emtek.

Jump To: Bulletin Board » Bob's TV Projects & Products