The table saw is an important woodworking tool. Here…
…Step 1: Familiarize yourself with the table saw. Take the time to learn the different parts of the table saw. Use the instructions that came with the…

Jump To: How To Library » Carpentry » Carpentry Tools

…or a sled makes the process of making multiple cross-cuts accurate, fast and safe. Here s how to make one for your table saw. Step 1: Cut a piece of hardwood for the miter slot. First, remove the miter fence. Cut a piece of hardwood…

Jump To: How To Library » Carpentry » Carpentry Tools

… For on-site work, a portable table saw is more practical than larger, heavier…
…stock of various thicknesses (a table saw with a ten-inch blade can cut stock…
…single disadvantage of a portable table saw: A larger tabletop makes the tool…

Jump To: How To Library » Hardware Tools » Power Tools

…located on the name plate on the front of the saw. Saws stamped with an "X" on the name plate are not included in the recall. Consumers should stop using the saw and contact DeWALT at 888-742-9178 to obtain a free replacement table saw.

Jump To: Blog » Hardware Tools

The numbers are staggering one table saw injury in the U.S. every nine minutes, over 60,000…
…stop and say, "Wow." Presenting the world's safest table saw, the Saw Stop. The demostration video (excerpts on…

Jump To: Blog » Carpentry

…several hours with little more than a table saw and a nail gun. Popular pre-fabricated…
…says Mena, so customers will need a table saw to fit and install. A jigsaw may…
…will be required. For tools, a table saw, nail gun and miter saw are essential…

Jump To: How To Library » Walls & Ceilings » Walls » Wood Paneling

…Set the thickness guide to just over half the wood's width. The proper height setting for a table saw blade Before turning on your table saw, make sure that the height of the saw blade is no more than 1/2-in. above the surface of the…

Jump To: How To Library » Hardware Tools » Power Tools

…stock, cut the same lap using the table saw with the dado blade set up. This…
…of the lap. Step 8: Set the table saw fence. The dado blade depth is…
…inside edge of the lap. Set the table saw fence to cut along the inside edge…

Jump To: How To Library » Carpentry » Carpentry Cuts

…Dry-fit the pieces together. Step 10: Set the dado stack. The stacked dado is comprised of two 1/8-inch table saw dado blades stacked side by side. Running a board through the stack will create a 1/4-inch groove. This slot will…

Jump To: How To Library » Deck, Porch & Patio » Deck

…rabbit into the 4 x 4 posts. A rabbit will be cut into the entire length of both 4 x 4 posts, using a dado stack on a table saw. The rabbit will secure the tongue-and-groove boards. Set the dado stack 5/8-inch wide, with a 1/2-inch…

Jump To: How To Library » Lawn & Garden » Walls & Fences