I was wanting to see if anyone has plans they could email me or know of where I could get plans to make a picketfence twin bed. I am wanting it to have a headboard and footboard. Any and all help is greatly appreciated.
Hi: My question is: how bad is Douglas Fir for a picketfence if it gets 2 coats of Sherwin-Williams opaque stain. I live at the Jersey shore and most of the rich people use cedar or (ughh
We just built a picketfence from pressure treated lumber and we are trying to decide on paint or stain to make the fence white. We live in Michigan, harsh
between them, and the fence slats all cut to a point on top...essentially a 6 ft tall picket privacy fence. Do the mitre cuts at the top of a picket do an adequate job of preventing water from seeping into the end grain and discoloring the
I have a 30 ft section of chain link fence along a property line that I wish to replace w/wood picket or shadow type of fencing. I would like to avoid going through the agony of digging up the metal posts embedded in cement and
I've decided against a vinyl picketfence and am building my own from wood coated deck screws. The pickets are treatd 1X4's and will be into each rail (four screws per picket). Pickets are about 36" high. I plan
Well I got my picketfence built and I'm going to be ready to paint it in a few weeks. So primer coat and at least one finish coat, quite possibly two. The pickets are 3.5" and spaced about 2.75" apart, posts every 8', two
Maybe a Lumber Yard can route-out the centers of your 4x4s. This would meant that they'd have to cut them in half, length-wise, then route them out (half and half) to the proper diameter of your existing posts.
The classic white picketfence comes in a wide board profiles. Picket fences are shorter them. A classic picketfence features a Gothic A more ornate picket might feature the featured in modern pickets, shadow box, and