Home > Video Channel > Cord Connections

Cord Connections

To keep tools from disconnecting from the extension cord, try this: Before joining the cords, first make half of a square knot, like tying your shoes before you make the bow. Then plug the ends together. Avoid using the undersized cords that can cause voltage drop, tool overheating, and power loss.
Get Adobe Flash Player to see this content.

Clip Transcript For:

Cord Connections

  computer-generated transcript - may not be 100% accurate

" Hi, I'm Bob Vila from Home Again. To keep tools from disconnecting from extension cords, try this. Before joining the cords, first make half a square knot, like tying your shoes before you make the bow. Then, plug the ends together. Avoid using undersized cords that can cause voltage drop, tool overheating, and power loss. I'm Bob Vila, good luck with your home improvement project. "

 [-]


More Videos »Related Videos

Hurricane Straps, Clips, & Anchor Bolts
Hurricane Straps, Clips, & Anchor Bolts

Your home's ability to resist the extreme force of wind is only as strong as its weakest link, so the only sure way to create a wind-resistant home is to secure all its connections: roof-to-wall, floor-to-floor and wall-to-foundation. The roof is your home's first line of defense from a storm. To make sure the roof stays in place when severe winds blow, securely anchor roof-to-wall connections by installing hurricane straps or clips at every wall-to-rafter connection to reinforce the roof. Even if re-roofing your existing home is years away, it is possible for roofing professionals to access and reinforce an existing home's roof-to-wall connections with hurricane straps and clips. These connections are critical in holding the roof together and will dramatically increase the homes overall resistance to wind. Along with roof-to-wall connections -- all joints in the structure -- floor-to-floor and wall-to-foundation -- must also be secured to create a "continuous load path" to the building's foundation. Secure floor-to-floor connections by making sure each floor is connected to the floor below with straps or clips in addition to any other code-required nailing schedule. Wall-to-foundation connections should be made through the use of anchor bolts or mud-sill anchors. Be sure to install all connectors following manufacturer's specifications.

Installing Molding
Installing Molding

Dress up the rooms in your house with a variety of custom moldings. These moldings are available in many historic profiles. You can add a one piece baseboard molding for a 19th century look. Poplar chair rails and picture moldings add detail and take paint well. And for a more elegant look add a multi-piece crown molding to the ceiling.

Hanging Wallboard
Hanging Wallboard

When hanging wallboard on an angle, try this technique. Measure the length from the edge of the wall to the end of the angle. Next, measure the height - think of it as outlining a triangle. Mark the measurements on your wallboard and snap a chalkline.

Ladder Work
Ladder Work

Here are some tips that will make working on a ladder easier. Use elastic cords to secure a small plastic basket to the top of your stepladder to hold your tools. If you're on an extension ladder, slide a broom handle through a hollow rung and hang a bucket for tools from that. Keeping your tools close at hand, you'll save several trips up and down the ladder.

Related Products & Services Showrooms

Vinyl Siding, Eaves and Overhangs
Vinyl Siding, Eaves and Overhangs

…is a decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to worry…

Heating & Cooling Repair
Heating & Cooling Repair

…is a decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to…

More Content »More Content

How to Cash In on the Replacement Window Tax Credit
How to Cash In on the Replacement Window Tax Credit

If you are looking to save some money on a home improvement project this year, consider starting with those old windows. A new federal tax credit can put 30% of what you spend on new energy…

The Low-Stress Home Renovation
The Low-Stress Home Renovation

…than the bedrooms that anyone could go. Her home improvement project involved expanding the kitchen and family room…
…inventory problems will delay your project. Any home improvement project, no matter the scale, is going to come with…

How To Install a Hardwood Floor
How To Install a Hardwood Floor

With patience and attention to detail, installing a new wooden floor can be an easy home improvement project. Step 1: Check the first course of flooring. If there is a heating register near the wall to work around, you will need…

How Contractors Choose Projects
How Contractors Choose Projects

…of the project, your budget, and time frame if you want them to say yes. Anyone who has embarked upon a home improvement project has heard advice on how to select the right contractor. The emphasis is on finding an honest, competent, professional…

Browse Topics

Click on a letter to browse content by topic alphabetically.



About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© BobVila.com 2009