Home > Video Channel > Drill Press

Drill Press

A drill press is simply a stationary version of your hand-held drill. Its primary advantage is accuracy. It will drill holes of identical size, depth, and position as many times as you like. The free-standing model is larger than the table-top model, so it allows you to tackle larger projects.
Get Adobe Flash Player to see this content.

Clip Transcript For:

Drill Press

  computer-generated transcript - may not be 100% accurate

" Hi! I'm Bob Vila from Home Again. A drill press is simply a stationary version of your hand-held drill. Its primary advantage is accuracy. It will drill holes of identical size, depth, and position as many times as you like. The free-standing model is larger than the table top model, so it allows you to tackle larger projects. I'm Bob Vila, good luck with your home improvement project. "

 [-]


More Videos »Related Videos

Choosing Drill Bits
Choosing Drill Bits

When it comes to planning for your next household project, choosing the right drill bit can make your job much more efficient. The most common bit is called a twist. These are fine for basic woodworking. However, if the task involves more detailed drilling, using a spade or a brad point will give you cleaner holes with less effort. For even neater, more accurate results, try a forstner. It's a heavy duty, longer lasting bit.

European Hinges
European Hinges

To hang heavy cabinet doors and to conceal the hardware, use mortised European-style hinges. Use a 35 mm drill bit and set your drill press to half inch depths. Place the holes a quarter inch from the door's edge and be careful, when you set the depth, not to drill through the door. Attach the hinge to the mortise, and then attach the door to the cabinet box. When the cabinets are installed, the hinges will be completely invisible.

Installing Fixtures in a Tiled Bath
Installing Fixtures in a Tiled Bath

Bob checks out the Trikeenan hand-made tiles in the bathroom and the plumbing fixtures selected for the remodeled bath. The Moen Waterhill showerhead, handles, and towel ring are all from the Moen ShowHouse Collection. Bob watches as Tim Berky drills into the tile to set the fittings for the towel ring. He stresses the importance of drilling slowly and of having a new carbide drill bit to avoid cracking or damaging the tile.

Florida Kitchen Cabinet Installation
Florida Kitchen Cabinet Installation

Richard Wagner of Wagner Cabinetry is in Punta Gorda for the installation of Cardell Maple cabinets. He starts with an overhead box that is marked for placement using a laser level. Since the exterior walls are concrete and the wall studs are steel, Bob asks how they handle installation. Wagner explains that as with wood, it's a matter of finding a stud and tacking with a finish nail before screwing the cabinets in place. Once tacked, the cabinets are checked again for level and screwed together with 2 1/2-inch flathead, square drive, zinc-coated screws with wood master tips that are serrated and cut through wood like a drill bit. With these screws, Wagner can avoid pre-drilling. After the doors are reattached and adjusted for swing, the crew moves to the base cabinet, which is nearly level and needs only be shimmed in the back. It is checked with a laser line at the wall and two feet out before being drilled in and finished with a toe kick. Bob shows the crown molding that is glued and tacked in place at the top of the cabinets for a finished look.

Related Products & Services Showrooms

Vinyl Siding, Eaves and Overhangs
Vinyl Siding, Eaves and Overhangs

…is a decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to worry…

Heating & Cooling Repair
Heating & Cooling Repair

…is a decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to…

More Content »More Content

How to Cash In on the Replacement Window Tax Credit
How to Cash In on the Replacement Window Tax Credit

If you are looking to save some money on a home improvement project this year, consider starting with those old windows. A new federal tax credit can put 30% of what you spend on new energy…

The Low-Stress Home Renovation
The Low-Stress Home Renovation

…than the bedrooms that anyone could go. Her home improvement project involved expanding the kitchen and family room…
…inventory problems will delay your project. Any home improvement project, no matter the scale, is going to come with…

How To Install a Hardwood Floor
How To Install a Hardwood Floor

With patience and attention to detail, installing a new wooden floor can be an easy home improvement project. Step 1: Check the first course of flooring. If there is a heating register near the wall to work around, you will need…

How Contractors Choose Projects
How Contractors Choose Projects

…of the project, your budget, and time frame if you want them to say yes. Anyone who has embarked upon a home improvement project has heard advice on how to select the right contractor. The emphasis is on finding an honest, competent, professional…

Browse Topics

Click on a letter to browse content by topic alphabetically.



About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© BobVila.com 2009