Bob is joined by Tom McNealy of Blue Haven Pools as the crew forms, sprays, and shapes a gunite cement pool. McNealy explains that the excavation was simple, but the crew found some groundwater at the bottom that must be removed with a line that is run and remains in the crushed stone at the base. McNealy shows how the form is established first by the two by fours that are driven and set with outriggers to establish the shape and hold back the soil. The crew then runs steeltex or paper-backed steel mesh to define the walls and floor and hold back the earth. The batch trucks bring the gunite -- a mix of cement and sand -- and pump it through a hose where the sprayer mixes it with water at the nozzle. The walls and the floor have six inches of gunite blown at them. The crew has about 30 minutes to form, shape, and smooth the cement before it sets. The steps and the swim out are sprayed in as a pile then cut and smoothed by hand.

Hardiplank, a product made of fiber cement, will be used for the siding. The planks are made of a mix of wood fiber and cement, which work well together. The planks are durable and hold paint well. The siding being used is prefinished, so it is installed with a final factory-finsh coat.

Bob meets Larry in the master bathroom, where he is installing a cement backerboard to the walls and floor of the shower stall and tiled floors. Larry explains that when combined with the latex mortar mix it essentially becomes waterproof when the tiles are installed. Larry�s assistant Kenny then shows Bob how to cut the cement board and attach it to the walls with galvanized screws.

While the house is being dried out, the siding can be put in place. The furring strips are attached to the foam exterior with an adhesive foam. Fasteners are used to affix the fiber cement siding and make sure it's secure. Bob talks with Jack Armour from Powers Fasteners about the fasteners used to secure the siding. Holes are drilled into the structure that are the same diameter as the fasteners . The fasteners are built with a "S" shape and are heat treated so that when the fasteners exert pressure against the cement walls and heat up, they try to return to their original shap, causing them to tighten their grip within the walls . Powers Fasteners is a company that is almost 100 years old. The fasteners were originally made of jute and then gradually started being made of plastic. HardiPlank, a product made of fiber cement, will be used for the siding. The planks are made of a mix of wood fiber and cement, which work well together. The planks are durable and hold paint well. The siding being used is prefinished.

…decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to worry…

…decision you will be happy with for many years to come. You know you can count on Sears to complete your home improvement project with high quality materials, workmanship and installation. And by calling Sears you know you don’t have to worry…

If you are looking to save some money on a home improvement project this year, consider starting with those old windows. A new federal tax credit can put 30% of what you spend on new energy…

…the bedrooms that anyone could go. Her home improvement project involved expanding the kitchen and family room…
…problems will delay your project. Any home improvement project, no matter the scale, is going to come with its…

With patience and attention to detail, installing a new wooden floor can be an easy home improvement project. Step 1: Check the first course of flooring. If there is a heating register near the wall to work around, you will need…

…the project, your budget, and time frame if you want them to say yes. Anyone who has embarked upon a home improvement project has heard advice on how to select the right contractor. The emphasis is on finding an honest, competent, professional…