View ChannelsFeatured: Finance
View ShowroomsFeatured: Radiantec - Radiant Solar Heating

BobVila.com

Home

Installing an ODL Tubular Skylight

Bob joins Charlie on the third floor of the Medford house where he's installing an ODL tubular skylight. It's a pretty simple do-it-yourself project. You just cut a hole in the roof and assemble the parts. So far Charlie has made the hole in the roof and installed the flange that sits on top of the roof. It's one piece so there is little chance of water coming through and there is no step flashing involved. Next he installs the reflective tubing through the flange and attaches the solar lens within an acrylic bubble that tops it. He then attaches the tubing that goes through the attic space and tapes the pieces together with reflective tape. The 14-inch diameter tubing is articulated so that it can bend a bit to adjust for framing elements that might be in the way. Charlie has already cut a plywood collar for the tubing which will screw onto the drywall. When the ceiling is plastered he'll finish the job - attaching the interior flange and the trim kit - creating the appearance of a light fixture - only without electricity.

Get Adobe Flash Player to see this content.

Chapters from this episode

Putting in Copper Gutters Now Playing

Putting in Copper Gutters

Installing Standing Seam Copper Roofing Now Playing

Installing Standing Seam Copper Roofing

Now Playing

Putting in a Gable Window

House Prep and Exterior Painting Now Playing

House Prep and Exterior Painting

Installing an ODL Tubular Skylight Now Playing

Installing an ODL Tubular Skylight

Clip Transcript For:

Installing an ODL Tubular Skylight

computer-generated transcript - may not be 100% accurate

" Part of Europe -- and you're installing a and what is -- an audio. Tubular skylight price cut for us that is a great do it yourself project pretty simple project it's just. Cutting a hole in the roof and putting the parts together right -- us what have you done so far so probably does and we in the home roof. We've installed this flange. It sits right on top of the roof and it's one piece -- you really have very little -- chance of any water coming through yep most of us -- involved we take it reflective. To the reporting community through with plans may bring back the so when shingles on top of the captives is an acrylic. -- really part and it's up on the roof and it has a lens in it that reflective lens that reflects down through the -- And then the tubing that goes in through the attic thing right here asked. And it's got a protective. You know it is peel away just like him here. OK now how to go to going to resist. Fasten these two together. Simple. -- And it again taped together have a reflective tape because it's twelve and up and here here and so. He'll be right. What you already marked it you're gonna slightly boxing ago now these are. Articulated and you can bend them a little bit to adjust for any kind of framing that might buy your way. And in this in this case when we do framing to avoid. And then -- it it creates the colors -- in the morning. What was the -- since then. What's it. Concerned with. Okay floral -- all right now that goes through you've already cut a plywood collar for this right right so that we can be able. How -- you art's garage Chirac on and just take our collar here. Right up into our framing opening you know. -- just screw it right again. We're also. I think. To me. Excellent. -- now all of that sunlight in just a fourteen inch diameter tube is mirrored down. Into the living space all right so once the ceiling is plastered you attach this flange in this trim kit to it isn't over there for just a second to get the idea."

[-]

More Videos »Related Videos

Roof Flashing

Bob meets with Ed Weller and looks at the roof flashing details. Bob reviews the various pieces involved in flashing including the drip strip, fascia, felt and roofing nails.

Completing the Trim on the Oriel Windows

The western red cedar decking is complete on one side of the house and Tim Berky, the general contractor, is completing trim on the oriel windows that face onto the deck. Berky begins by covering the existing board with MDO (medium density overlay) to create a new surface over the underboard, an ice and water barrier, and copper flashing installed to keep water away from the house. Berky then installs corner dressing to trim out the outside of the window base. At the top, he will apply two layers with casing and corner board that he nails into place with a nailgun.

Installing the French Doors

Matt Alexander is getting ready to install the new Pella French doors. The rough opening is 72' x 82'. Originally there had been a window where the doors will be installed. Matt and Charlie cut it out, put in bigger studs, headed it off with 2 x 10s with a 3/4" sandwich. Bob points out the way Matt and Charlie maintain the plaster in good condition when cutting through a section of old lath and plaster. They take a length of strapping and use screws to firm it up right into the studwork to prevent the reciprocating saw from damaging it. Matt has used aluminum flashing at the base of the door installation to keep water from getting behind and rotting out the house when it runs down. The door comes with nailing fins that fold up at 90 degrees to the door. The installers will nail through the fins to attach the door behind the cladding. For waterproofing they apply a bead of sealant underneath the door at the sill and a bead behind the fin. The most important part of the installation is ensuring that the door is good and plumb so that it will swing properly.

Installing Roof Shingles

Bob reviews the varous elements of the roof, including the fascia, soffits and sheathing. The shingles are then applied in layers, adhearing to the row beneath. Flashing is also installed and discussed.