View ChannelsFeatured: Finance
View ShowroomsFeatured: Radiantec - Radiant Solar Heating

BobVila.com

Home

Cutting and Installing Baseboard Trim

In the master bedroom, Bob Ryley is installing the medium density fiberboard baseboard trim. Where two pieces of trim meet in a corner, Ryley's approach is to cope the inside corner. He begins by using a table saw to cut out the majority of the wood. Then, using a coping saw, he follows the trim's edge profile to get a tight-fitting joint. Ryley first dry fits the coped joint to check the work and, once satisfied, secures the trim with finish nails.

Get Adobe Flash Player to see this content.

Chapters from this episode

Installing Interior Window Casings and Sill Now Playing

Installing Interior Window Casings and Sill

Cutting and Installing Door Trim Now Playing

Cutting and Installing Door Trim

Now Playing

Cutting and Installing Baseboard Trim

Shimming, Centering, and Hanging an Interior Door Now Playing

Shimming, Centering, and Hanging an Interior Door

Hanging an Engineered Wood Six-Panel Door Now Playing

Hanging an Engineered Wood Six-Panel Door

Custom Home Design Using Computer Software Now Playing

Custom Home Design Using Computer Software

Clip Transcript For:

Cutting and Installing Baseboard Trim

computer-generated transcript - may not be 100% accurate

" Now the baseboard is being installed is this medium density fiber board product. Which goes very quickly. -- it's -- this second piece attached -- so either the butt cut that. Goes right against decided I -- miter the inside corner no -- north that cope on that insight on. We take some of the meat out of that. So you don't have to do all that my hand to write the rest of that we'll take out the culprits. Do you just let that profile be your guide that's right. All right let's put them over in the corner it. And a good. 300 benefits. From the -- you got another first track very get."

[-]

More Videos »Related Videos

How to Use a Table Saw

The table saw is an important woodworking tool. Here is how to use one safely.

How to Build a Sled or Boat for a Table Saw

A boat or a sled makes the process of making multiple cross-cuts accurate, fast and safe. Here�™s how to make one for your table saw.

Table Saw

Here's a table saw accessory you can make yourself. It's called a featherboard, and it will make ripsawing safer asnd more accurate. Start with a length of 1 x 4 inch scrap. Miter one end; then make a series of closely-spaced rip cuts in the end grain. When you're ready to saw, position your work and clamp the featherboard to the saw. The angled fingers will hold the piece in line and prevent kickback.

Specialty Blades

Your table saw may be more versatile than you think. In addition to making a variety of straight andangled cuts, you can outfit your saw with a dado blade for grooves and rabbets.Molding cutters are available to shape a wide variety of profiles in wood stock. With the addition of specialty blades, your table saw can perform a wide variety of jobs with accuracy and speed.