On location at the project house, Robert Adam from the North Bennet Street School demonstrates the tools and techniques used to handcraft reproduction moldings. Using a millwork profile found in the Winslow Crocker House, Adam uses a selection of antique hand tools to recreate the molding using century-old techniques.

Bob explains that the house being remodeled was built in 1921 and has never had a real facelift on the exterior. As a consequence, the home's trim, porch ceiling, decking, and windows were all in need of repair. Bob points out the oriel window's exterior frame that has allowed cold air into the home. To fix this problem, local carpenters were called in to tear it apart, insulate, and restructure it. Forester Molding & Lumber was then brought in to replace the 85-year-old trim. Bill Hopkins from Forester Molding & Lumber reviews how old house moldings cannot be found in lumberyards and must be replicated. Hopkins uses a needle gauge to trace the profile of the trim. The needle gauge is then placed on a piece of graph paper and traced. The profile is then used to search for available matches in the Forester catalog. If there is no match, the trim is scanned into the computer and a specialized knife is cut. The knife is then used in the machine to rip the molding.

Bob walks through the interior noting the reproduction bed molding, door molding, and rosettes that match the original moldings in this Queen Anne style home. With the kitchen cabinets and island complete, it's time to turn to lighting fixtures. bed molding, dining area, rosettes, island unit complete with paneling

Dress up the rooms in your house with a variety of custom moldings. These moldings are available in many historic profiles. You can add a one piece baseboard molding for a 19th century look. Poplar chair rails and picture moldings add detail and take paint well. And for a more elegant look add a multi-piece crown molding to the ceiling.

…Sealant • Combines the performance characteristics of silicone and polyurethane • Apply around doors, windows, trim, siding, countertops and other projects White Lightning® All Purpose MEGALASTIC Super Elastic Sealant • Provides…

…Bob Vila Constructing a Porch Trellis Season 2 Painting a Stucco and Wood Exterior Season 2 Western Red Cedar Trim and Boards Season 2 Installing Western Red Cedar Decking Season 1 Expanded Outdoor Living Season 1 More about…

…cutting "in place." The molding is placed in the miter saw upside down against…
…hand, 45-degree miter angle. The molding stock will be on the…
…make a scarf, set the miter angle to 45 degrees. Hold the molding flat against the fence…

… The size of the molding can also have an impact…
…to cut on the average miter saw. Homeowners looking to install the molding themselves should take…
…vary depending on the molding material. Real woods…
…Corners will require a miter saw and a jigsaw or coping…

A miter box is an important tool to help cut perfect…
…Collect and understand the parts. The miter box will consist of three lengths of wood…
…center of the elevated base. With the miter box parts resting in their appropriate positions…