View ChannelsFeatured: Finance
View ShowroomsFeatured: Radiantec - Radiant Solar Heating

BobVila.com

Home

Whole-House Surge Protection

A surge protector is being installed in the Punta Gorda storm-ready house to protect the home's appliances, cicuitry, data, phone, and televisions from stray voltage that can ruin appliances. The Square D All House Surge Arrester is designed to redirect transient high voltage to a ground and away from the household circuitry. The attachments for cable and satellite TV, phone, data, and low voltage appliances are wired into a breaker connected to a monitor that tells whether the service has suffered a strike from lighting or power spikes. A light indicates to the homeowner whether the protection was activated.

Get Adobe Flash Player to see this content.

Chapters from this episode

Whole-House Surge Protection Now Playing

Whole-House Surge Protection

Plumbing Fittings and Faucets Now Playing

Plumbing Fittings and Faucets

Installing Natural Bamboo Sliding Panel Shades Now Playing

Installing Natural Bamboo Sliding Panel Shades

Custom Bamboo Garden Now Playing

Custom Bamboo Garden

Now Playing

Energy Star Lighting Fixtures and Ceiling Fan

Installing Hardwood Floors over Concrete Now Playing

Installing Hardwood Floors over Concrete

Clip Transcript For:

Whole-House Surge Protection

computer-generated transcript - may not be 100% accurate

" One of the mistakes that a lot of people make when remodeling or building from scratch is not budgeting enough money for the fittings -- in the kitchen sink fittings the faucet or in the bathrooms and -- our plumber isn't it true that you know you don't want to have to be calling a plumber to do repairs on your kitchen process so it makes sense to get some quality in there."

" Absolutely yeah wouldn't we got here. We have name -- This would be the moen diverter with a pull out spray through the spout yeah. -- like -- very nice product very easily maintained. Homeowners can repair this in five minutes."

" Well that's the thing today is we have so many options in the world of plumbing some of it is very sophisticated and expensive when it comes time do repair. Correct you can cost."

" That's something you might want to think about when you're buying a faucet is availability of repair parts no matter how well let's build eventually it's gonna have to be repaired."

" Yes and it was made in what overseas then sometimes it's not so easy the sum of the parts aren't very common to find this looks like oil rubbed bronze -- its. It's a brass alloy. And what do you install first."

" Usually we put the murder and then there on this particular model it's got a spray that comes through here and hooks to the faucet here. And then what attaches this says about midway into the loop. Is that a weight we put on there -- actual. When you go to put the sink back on the way to -- them socket -- retract it right. What are you doing next. OK and what we've done after we've -- so."

" You supply arms to the faucets itself and then we've taken time into our what we call stops they shut off the department. And in the --"

" It's required that way if you do have a problem with something you're not haven't shut -- bounced right you're able just shut off the one fiction."

" No copper pipe to cut. --"

" And that's going to lunch at an installation of the faucet great."

[-]

More Videos »Related Videos

Sweating a Joint in Copper Plumbing

The plumber Steve Bowton shows Bob how to sweat a joint in copper plumbing. First he cleans the pipes with an emery cloth. Then he explains that plumbers no longer use lead solder and instead use a tin and antimony mixture to protect homeowners from lead poisoning. Then he puts flux on the pipes and the fittings. Places the fixture on the pipes and levels it, then solders the joints. The flux helps draw the solder into the space.

Electrical Wiring and Plumbing for a Basement Bathroom

Bob explains how remodeling a basement presents owners with options they didn't realize they had. In the Melrose home project, a space previously used as a little paint closet was converted to house a half bathroom that is badly needed in a home with only one bathroom for its four members. The area was reframed and the staircase restructured to accommodate the room. Al Leone of Plumbers Union Local Number 12 installed the new piping using PEX flexible tubing. Electricians were then called in to rewire the area. Electrician John Schiavone installed the wires, circuits, switches, and outlets.

Reworking the Existing Plumbing

Bob reviews the work done on the existing plumbing once all the waterproofing and flood-prevention measures are put in place in the basement. Al Leone of Leone Plumbing Corp. first cut the pipes into sections for easy removal. The cast iron pipe was cut and removed using a special pipe cutter. Bob explains that Leone is a union contractor who decided to go into business for himself. His helper, Matthew Orlando, is going through the apprentice training program through the Plumber and Gas Fitters Local Union Number 12 in Boston. The chapter spends $4,500 a year to put each apprentice through a thorough five-year training program where they spend two nights per week learning about everything from bathrooms to hospital gas work. Leone demonstrates some of the specialized work he does to install the pipe, including using oakum, a joint runner, and poured hot lead to form a joint seal. Leone then shows how some of the other seals are put in place in the pipe.

Installing Plumbing Loop and Fixtures for Multiple Head Shower

Bob tours the upstairs master bath with an eye towards the space's luxury appointments, including the double vanity fixtures, granite countertop, and Wellborn cabinets. Plumber Dave DuVerger is installing a trim package to finish off the spacious shower. The shower features three showerheads in a nearly six-by-six foot enclosure. To supply enough water pressure, these are built on a plumbing loop with a 3/4-inch supply line.