Home > Video Channel > Installing Sound Attenuation Insulation

Installing Sound Attenuation Insulation

Bob recaps the work done so far in the nursery project at the home in Melrose, Massachusetts. The house has already been insulated for the tough New England winters and will now be insulated for sound control. Bob talks with Arline Bronzaft, an Environmental Psychologist with a PhD in child development, about the importance of raising a baby in a quiet environment. Bronzaft stresses the importance of a good night's sleep for an infant. With this in mind, Bob reviews a discussion he had with Harry Alter of Owens Corning and the installation of their sound attenuation product, QuietZone. Alter reviews the necessary safety equipment for installing the Owens Corning QuietZone batt insulation and demonstrates how it is installed. Alter shows how to mark outlets and cut the insulation to accomodate them. Alter also shows how the insulation can be split apart to surround existing wiring. Bob talks to Alter about making sure all the stud cavities are filled and to be on the lookout for any gaps or cracks. Alter reviews with Bob the differences between acoustic and thermal insulation. This product is a lighter weight density insulation designed specifically for accoustic insulation. A special caulk is applied in gaps and cracks that cannot be filled by the QuietZone insulation, particularly where the walls meet the floor, ceiling, and door, and around all outlets.
Get Adobe Flash Player to see this content.

Clip Transcript For:

Installing Sound Attenuation Insulation

  computer-generated transcript - may not be 100% accurate

" This is our third visit to our nursery project here in Melrose Massachusetts where a young couple have bought their first home a two family home so that the rental income helps defray the cost of the mortgage and they're busy remodeling some bathrooms and a bedroom getting ready for the first baby's arrival. Any day now. Nick and Maggie live on the second and third floor of this big 1895 house they've already insulated the roof up above there to help defray the cost of heating. In our tough New England winters now it's time to talk about insulating the interior walls for sound attenuation. Because after all baby needs a quiet environment as well as a warm one. -- bronze after the Ph.D. in child psychology and you're visiting us here at this project and I guess one of the things that would concern us is why is it important to have peace and quiet around the nursery."

" Well a child has to sleep. And children really find it much easier to fall asleep in a quiet room. Now you might say -- me but the child's gonna make some sounds. Those of the sounds for parents and when the child makes sounds chipping in fact. It's usually a cry because child's wet the child's hungry. Other child is uncomfortable. And -- cues that parents have to listen to and attend to and quiet the child. But when the child has to fall asleep it's important for the child's development that the child has been a good actually even though it's broken up. By feeding -- sure that they that they need to sleep development occurs while the child's asleep but some."

" Would make the observation that many babies come into a household where there's already one -- two -- thanks to wonder drugs maybe six other kids. They're older and that are making a racket around the house. Isn't enforcing very important also for a baby to kind of get accustomed to that buzz and that -- Illinois --"

" You're talking about the child getting accustomed but the baby is still a baby we're talking about a newborn infants we're talking about an infant from. Zero to six or seven months today. When you putting a child to sleep. It's generally better to have a quieter environment for that child that's where they call them lullabies. Right that's a very good word. Is also something else I think what it also says in terms of the environment of the house out. That the parent that understands the child needs some quietly and child's very young will also understand that for that child's mental and physical development. Fit there will be times when quiet will help that child to study to learn to read. Quiet is not silenced. It's just quiet we can still hear the breeze we can still hear -- And that the child will get and of course want those sounds those wonderful sounds. But whether it's just an infant that we're talking about we're really focusing on rest and that is definitely aided."

" I -- Arlene thank you for those insights. I now as part of doing this to the environment Owens Corning has come up with a whole concept of the Quietzone. And Harry alter was here just a few days ago getting started with some of the measures that we're taking to assure that the nursery is a Quietzone. "

" First of all the first thing to have is long sleeve shirts all right after that. You have gloves and he will handle the fiberglass lid. Next is goggles."

" I had."

" And then last of all you -- dust mask. Consists of pretty simple process. -- this type of that not enough. To put into the cabinet in Tuscany and as you know. -- all of that comes out of the face fancy have a little flange shared. We basically staple that about every eight inches. Do you just want basically let it. -- in the cavity."

" Make sure it's and then when you get -- outlet. -- basically. -- basically kind of mark where the outlet is."

" that you can take this off. And cut it out. Okay. And -- about can't. Around the outlets. Again making sure they -- not compressing the -- clean illusion just a split the the mat. Can you can stuff this. Right behind the wiring. And bring it down. All right so you've got to the wiring him and a half. When you bring the Batt up over."

" So Harry the thing I noticed right away is that you've done a very careful and meticulous job of installing. The product here. So there aren't any gaps and it did really fills in the cavity between the studs that's important I guess right yeah make sure although there's this threat cavities are filled. And then after you do that obviously -- you want to start looking for any gaps and cracks in the wall because that's an easy path for noise to get through OK and that's who we certainly can't caulk. Is this fiber that's different from what we put the sidewalk keep the cold out. Well there's a lot of different densities of fiberglass night and this is one density that is a lightweight density. And it's designed specifically for acoustics it's not used -- is not tested normally we do all our testing specifically for its ability to reduce noise. In floors or ceilings to reduce noise transmission okay so what's the caulking gun for. That quite some acoustic ceiling and this is a that's disorganized acrylic. And is designed to be flexible over time that it doesn't Harden. And we use it to seal up today the gaps and cracks in the wall. That can happen at the base plate where the base plate meets the floor and also -- around media outlets now happen after the gypsum goes up. And for this instant I'm going to be sealing up the gap where the existing ceiling meets this top plate. Just make sure everything is sealed up so all the way across from that corner and then down to the bottom. You want to provide a veto this yes. Okay. Thanks -- thank you."

 [-]


More Videos »Related Videos

Sound Attenuation
Sound Attenuation

Use fiberglass for sound attenuation in your interior partitions. It helps to deaden sounds and reduce household noises adding a lot of comfort to your home. It's especially effective around plumbing stacks and bathrooms as well as family rooms where teenagers congregate.

Installing Sound Attenuation Insulation
Installing Sound Attenuation Insulation

George Saylor from Owens Corning is on location in this episode to discuss the insulation products that will be used in the Waterfront Warehouse Rehab project. Before work begins, Bob notes the importance of wearing protective gear including gloves, hat, long sleeve shirt, pants, particle mask, and eye protection when working with fiberglass insualtion. Owens Corning has provided a fiberglass insulation that delivers an insulation value of R15 in only three and half inches of thickness. The material's higher density creates smaller more uniform cells of trapped air to provide a greater degree of insulation in a tighter space, making it more efficient. Saylor also explains how to insulate around outlets and other building infrastructure. On the exterior walls, extruded polystyrene insulation is being installed between the studs and wallboard to prevent thermal transfer from the metal studs to the building's interior. The additional material will create a R20 wall. In the living spaces, interior walls are filled with fiberglass batt insulation to prevent the transfer of sound from room to room.

Sound Attenuation and New Bath Preview
Sound Attenuation and New Bath Preview

Bob previews projects for the baby's room including sound insulation from Owens Corning. New products to reduce sound transmission and improve overall insulation will be featured in the upcoming episode. Bob also previews the upcoming construction of the new bathrooms.

Noise Control Using Fire Batts
Noise Control Using Fire Batts

Bob looks at the sound attenuation product being used in the ceilling of the Manhattan Brownstone. Chris Vila, the project manager, explains that unlike fiberglass batts, this Roxul AFB fire batt is thicker than traditional batt and completely blocks sound transfer while preventing the spread of fire from space to space.

More Content »More Content

High toilet flange

I purchased a home with a high toilet flange where the toilet rest on a shaped piece of wood in order to prop up the toilet. The wood seems to be molding. Is there any suggestion to repair the high toilet flange.

Sink flange sealing problem in coated sink

…problems sealing a garbage disopal sink flange in my kitchen sink. The sink is a coated…
…steel sink. As such, the lip of the flange does not sit flush on the edge of the…
…the sink hole is a bit larger than the flange diameter, which allows the plumbers putty…

Flange

there are a number of ways to replace the flange on a waste line coming up through the floor…
…everything is great. You can simply break off the old flange or cut it off, and glue a new flange on the inside. You have to buy a 4 x 3 flush…

raising toilet flange

…wood so we have to put down backerboard. The flange of toilet is a metal one under a lip of PVC…
…We cut a hole in the backerboard where the flange currently is. We used a Two Finger Toilet Flange that attaches to the existing flange and has…

Browse Topics

Click on a letter to browse content by topic alphabetically.



About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© BobVila.com 2009