- View ChannelsFeatured: Finance
- View ShowroomsFeatured: Radiantec - Radiant Solar Heating
Installing Paneling in the Master Bedroom Closet
Chapters from this episode
Now Playing
Now Playing
Clip Transcript For:
Installing Paneling in the Master Bedroom Closet
computer-generated transcript - may not be 100% accurate
" Now the panels that we're using here in in the dressing area are. From Brazil that some type of mahogany that's laminated on. -- chip Ford product in you know this is the nineties a lot of these products no longer have. Out -- situations and using glues that are quite safe and so it makes it easy to create. Rooms like we're doing here David Ives is working on this when I gave -- I've and in order to have to make everything kind of blend together with the doors. The closet what David has done is to take the panels and cut them into these rectangular sizes and pit them against the plywood that we put on the on the studs and closed everything in -- The system. Real Honduran mahogany right David no accidents and that is what you've done is you've run everything through and milled it. So that he got a -- on either side right so that's a cover over my cuts you guys covering and it's it's a very nice design because -- really creates -- kind of job. Bankers paneling yes are you dealing with -- by the -- we're just getting that and now and what we're doing exotic island."
" He says it -- set so that. Got a good good seal behind it -- penalties and yes this isn't really strikes have been used for putting on floors right. And that should work really well yeah. -- from work being mowing and in time from temperature change from. And you face nail it just bail out bill Billy little test here so make sure they're covered by -- trends. That is really the adhesive that is doing the oh yes that's really important because it hold it against the panels -- the plywood walked. Now you're not putting any adhesive behind the mahogany trim no on this case ceremonies and else to do that because I have good stud behind there. And that glue. Really doesn't have the strength of that. Tighten -- hogging and -- commodities thicker and song and it's a pretty strong yet exactly."
" And then one vertical piece. Spitzer there nifty. That's going to continue right through the room it and of course visited that he tells that the architect brings to the job he's played a lot of computer time. Doing not only the paneling Leon and also. -- things such as this door. Now this particular doors savings that is as the original doors in the house. But because everything in here is mahogany we had it milled and what's interesting is that from the point of view of getting custom door made this is under 300 dollars that's comparable to you know what you have to spend on to sometimes good solid flush door. So David will you be putting these pieces over here next yes we're going to continue era."
" Room and helps angled pieces here in rock form they're going to have to be finished up a little bit better. But they're going to come it's a twenty degree angle going to clean the mountain tiny room in there okay to get some more paneling throughout."
" So we've got to rip a few more pieces not -- Not Batman. Who OK so -- anybody out there who likes to -- got to work. Gets the wrong idea we've really had David working for five to six hours and that's a talented craftsman to get this far -- lot. This is fine work its -- work. But you gotta take it slowly and of course when this is farther along. We'll get the the other artisans in here to put a stain on to match the prefinished --"
