I would like to cover my brickwall in the basement with ceramic tile, but I have heard that covering brick causing the brick to deteriorate is this true?
I own a 1914 home in New York where rear, exterior brickwalls are covered with a stucco-like coating. During the winter, apparently after water seepage and freezing, large sections of
I am currently finishing a basement, and we are going to lay brick for two of the walls in the family room. My question is how to run electrical and TV cables between the concrete exterior walls and the interior brickwalls. Are there any special codes or considerations?
I own a relatively old house with 12" thick brickwalls (3 layers of brick). I want to install a 4" diameter dryer vent in the wall but am not sure if it is good enough to just core drill a 4" hole and hope the wall stays up or if there is a better method. Thanks!
I need to paint my newly rehabbed loft apt. interior that has a mixture of drywalled and red brickwalls. I want to leave the brick "as is," but would prefer "cool" vs "warm" colors for the drywalled areas. The floors will
We are remodeling an old apartment in New York and decided to expose one of the brickwalls. Our contractor used muriatic acid to clean the wall and it is now black. He is stating there is nothing else he can do. From
I suspect all useful answers will be to cover up the brick in some way. If you want to keep the brickwalls from being permanently covered, you could use heavy cloth wall hangings/tapestries like they did in the old stone castles
private spaces where you can feel cozy, despite the open floor plan. Embrace the original materials of the space, such as brickwalls, concrete floors and exposed ductwork. Remember that no walls means no outlets to plug in lamps. For new construction
plaster. In the Manhattan Brownstone, a variety of methods were employed, including plastering directly over the existing brickwalls that were first treated with a blue bonding agent. In areas where the brick had deteriorated, wire lath was used to create
tools and some mortar to make an old brickwall look like new. Step 1: Remove the with mortar, place it up against the brickwall, and pack the mortar into the cracks Step back and admire your repointed brickwall! Clean the bricks with a wire brush