Additional Site Matches

Products from Shop

Antique 3" C-Clamp w/Wing Screw Heavy Duty

Price: $22

GoAntiques.com

Home > Video Channel > Search Results for “C-clamp”

Full Site Results

« Prev12Next »

Showing 1-10 of 14 results

Found 14 items.

Top 3 Matches

The Essential Toolbox

…can apply tremendous force. Locking pliers are sold in several designs (with long nose, flat-jawed, and even C-clamp jaws), but the standard design has serrated, straight jaws. A pair in the eight- to ten-inch long range will have…

Jump To: How To Library » Hardware Tools » Purchasing Tools

jig

I just cut a slot on the bandsaw and used a small c-clamp to hold the scratch in place.

Jump To: Bulletin Board » The Rough Cut Show Forum

Try this jig......

…make a wide kerf.....this is a handle to steady the cap....... When you squeeze the board with a C-clamp the hole gets smaller ........grabbing the smooth cap without distortion.......

Jump To: Bulletin Board » Fix It Forum

the doors security has been compromised

… You will have door catching problems until this is completely replaced. You can do this for a band aid: Get a large C clamp and force the broken frame back together as tight as you can. Then pre drill several holes in the broken part as to screw…

Jump To: Bulletin Board » Fix It Forum

Sears&Roebuck Electric Hacksaw model #108 1501

This is like a bandsaw that uses a hacksaw blade being held by a device that looks like a large c-clamp,which is attached to a pivoting arm that is then attached to a cam wheel and works the blade back and forth to cut through stock…

Jump To: Bulletin Board » Fix It Forum

PB &Screws

…and it is not a good one - is to glue and clamp it. I would use carpenter's yellow glue and clamp it tightly with a C-clamp. There are special screws that are made to hold better in such materials. Those I have seen have a double thread…

Jump To: Bulletin Board » Fix It Forum

Cutting Plexi Idea ? OCT03

It seems to me a rotto zip would work if it didn't create meltdown then an the idea of an old iron bed rail used to C-clamp the plexi to a table or piece of wood then with a small 1/4 inch collet wood router using a fairly thin but not too…

Jump To: Bulletin Board » Fix It Forum

adhesive

…for a vacumn bond which holds by suction. Silicone is used for glass also. Slate is easily broken so do not use a C-clamp. Use duct tape and props to hold it in place for a day or so. Excellence is its own reward!

Jump To: Bulletin Board » Masonry and Stone

Anderson Sliding Glass Door

…plastic piece has come loose and either needs replacing or reglued. I attempted regluing with super glue and pressure (C-clamp) with no success. Anderson sells a replacement piece but no instructions about how to remove the existing piece without…

Jump To: Bulletin Board » Fix It Forum

please... I need help with my garage door

…out good solutin is put something in the area where it goes up and down like a bolt in the holes in the rollers,or a C-clamp tightly on the slides or just unplug it,till you get it figurd out is better than getting robbed blind'

Jump To: Bulletin Board » Miscellaneous

« Prev12Next »
Found 14 items.

Browse Topics

Click on a letter to browse content by topic alphabetically.



About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© BobVila.com 2009