…window counter-weight in the well. Remove the weight from the well and set it aside. Tie a fishingweight to a fishing line, and slide the weight and the line over the pulley and into the well. Tie the new sash cord to the end of the fishing…
…that a string suspended with a weight at the bottom will be both… …most any bit of string with a weight tied its end (a couple of… …say, or a lead sinker from a fishing line. But the factory-made… …bob has a specially designed weight and coarse string of twisted…
…twist a piece of solder to the end......or check Dad's tackle box for a small crimp lead weight........ Now start the small weight into the arm and turn and shake the fixture to allow gravity to fish the string......attach…
…around in the surplus store for a large ball weight. Just like a regular fishingweight but bigger. You need a brush made for chimney… …half slack and tie another knot. Tie the weight on the end and make sure the weight is on…
I have a old house 'full' of sash weight type windows. I have found that by using a lead head fishing lure (1/2 oz) and stout line I can fish the weight up without taking anything apart except the sash where the cord attaches. Hold it in…
…piping and the old ejector out of the well, other than the weight of the water in the lines the ejector came out easy. upon… …tried looking into the well with a under water camera I use for fishing, but it only has 60' of cable, but even still I could not…
…they only lasted a year and they have to be replaced again. With the weight of these windows this continued to be an ongoing problem. Is there… …than a few years? I have even thought of using 100 lb test spider wire fishing line.
