If you need to hacksaw through a fastened pipe or rod, but the space above is cramped, try this: Remove the hacksaw's blade, straddle the pipe with its frame from below, then reinstall the blade upside down. The teeth of the saw will cut…
Here's a way to get more life out of an old hacksaw blade. Mount it on the side edge of your workbench with about half the width of the teeth sticking up over the top surface. This…
…will not loosen, cut them off with a hacksaw. Once you have removed the bolts, lift… …that hold the bowl to the floor. Use a hacksaw to cut the bolts off if they are frozen… …crack. Cut the retaining bolts with a hacksaw just above the nuts and snap on the trim…
…to make an accurate cut. The position of making a cut with an electric saw is the same as making a cut with a handsaw or hacksaw. The cut line, the blade, your forearm, elbow and shoulder should all be in one straight line. First and foremost…
…connection and the opening in the barrel. Re-insert the downspout into the gutter above. Cut the downspout to size with a hacksaw. Step 6: Attach the downspout bracket. Fasten the bracket holding the downspout to the house. With the downspout…
…skirt that extends from the door to the threshold. Step 6: Cut the door sweep to fit and attach it to the door Use a hacksaw to cut the metal threshold strip to fit the door bottom. Then position the weatherstrip along the bottom of the door so that…
…reinforced tubular vinyl On a doorjamb or a window stop. Moderate to high. Seals well. Installation can be tricky. Hacksaw required to cut metal; butting corners pose a challenge. Door shoe: Aluminum face attachment with vinyl C-shaped…
