BobVila.com

…truly saturated. Roofing paper or felt is rolled across a roof deck and stapled or nailed in place. Builder's felt differs by…
…or synthetic underlayment applied on top, across the entire roof deck. These self-adhering underlayments are designed to seal…

Jump To: How To Library » Roofing » Flashing & Sheathing

…minimum. Officials and builders have learned that keeping the lid on a house means forming a tight bond between the sail-like roof deck and the walls below. That job falls to the engineered roof truss system that holds it all together. Trusses Surpass Traditional…

Jump To: How To Library » Special Features » Storm-Ready Home

…foot rolls for about $20 per roll. Have your roofer seal around roof deck penetrations with roof tape, sealant or asphalt roof cement. Replace…
…should not extend more than 1/4 to 1/2 inch beyond the edge of the roof deck.

Jump To: How To Library » Roofing » Miscellaneous Roofing Topics

…the contractors put up the rafters and began building the roof deck with the sheets of 3/4-inch plywood specified on the materials…
…crew could get the shield to stick to the wet plywood, the roof deck would never dry out and would rot. A temporary tar paper shield…

Jump To: How To Library » Special Features » Panelized Home

On location at the Vermont farmhouse in Quechee, Vt., the carpentry crew opted to sheath the exterior walls and roof deck with Georgia-Pacific's Blue Ribbon Oriented Strand Board. From around the house project to the exterior sheathing and…

…professional, an electrician, or both. The solar electric roofing products are configured in series or parallel on the roof deck to form an array. The array is then used in combination with conventional roofing products. The flexible thin-film shingle…

Jump To: How To Library » Roofing » Miscellaneous Roofing Topics

…this application (see photo below) two inch battens have been added to cover all of the panel joints which were lined up to provide for a continuous trim board. On a floor or roof deck, the joints would be staggered for added stability.

Jump To: How To Library » Framing » Wood Framing