BobVila.com

…foundation has been poured, the floor joists (many which are identical except…
…the metal webbing channels in each joist. The channels make it easier for…
…sills have been laid and the first floor joists and sub-floor are installed, the…

Jump To: How To Library » Special Features » Panelized Home

…traffic or heavy furnishings. If the floor joists aren't thick enough or aren't properly…
…floor. Two by eights, at minimum, and a joist span of 16 inches on-center are necessary…
…support to each of the joists increase their joist strength and enable floor construction…

Jump To: How To Library » Closets & Storage » Storage

…concrete. Next, they installed several beams and attached joist hangers to which the pressure treated horizontal joists were…
…later drove #8 galvanized nails through the planks into the floor joists. With other woods this might not have been necessary, but…

Jump To: How To Library » Special Features » Panelized Home

…weight of the house by transferring it to the footing. Girder: A main beam, usually of wood or steel, upon which the floor joists rest. Joists: The load-bearing horizontal spans made of steel or wood that support a floor system. Sill or sill…

Jump To: How To Library » Green Building

…containers give strength and structure to the house, effectively creating a steel box that is married together with steel floor joists and a plywood subfloor on the ground floor and a roof-truss system on top. Partition walls are created within the house…

Jump To: How To Library » Home Design

…often open and easily adapted to various uses. Basements offer the opportunity to rewire readily, insulate between the floor joists, apply acoustic ceiling tile, and construct insulated walls, so that this space can be as rambunctious and fun-filled…

Jump To: How To Library » Bedroom

…involve suspending the tubing underneath the subfloor between the joists. This method usually requires drilling through the floor joists in order to install the tubing. Reflective insulation must also be installed under the tubes to direct the heat upward…

Jump To: How To Library » HVAC » Radiant & Hydronic