BobVila.com

…overhang. To accomplish this Bob and Ryley built out 6x6 columns with 3/4" stock…
…all the corners. The four caps were precut, and even though there was not any pine wide enough on the job site, Ryley improvised with some pressure treated…

Jump To: How To Library » Walls & Ceilings » Walls » Wall Molding & Trim

…reference, locate the area on the roof sheathing directly above the hole in the interior…
…Drill a second hole through the roof sheathing to mark the center of the exterior skylight…
…to cut through the shingles and roof sheathing. Begin the cut in the hole in the center…

Jump To: How To Library » Windows » Skylights

…dish to the roof, driving bolts through the shingles and sheathing below. This system especially when installed without proper…
…satellite foot installer drives lag bolts through the roof and sheathing and hopes to hit a roof truss, says Steve Capozzi, president…

Jump To: How To Library » Roofing » Roof

…Savings for step-by-step instructions. Fire-retardant precut foam insulation forms install easily behind electrical outlet faceplates. (c) Maureen Blaney Flietner Fire-retardant precut foam insulation forms install easily behind electrical outlet…

Jump To: How To Library » Energy Efficiency » Energy Efficient Products & Technologies

…TechShield - TechShield radiant barrier sheathing can help homeowners conserve energy by…
…TechShield, the only radiant barrier sheathing with post-lamination incising, effectively…
…percent. And TechShield radiant barrier sheathing adds no additional time or labor costs…

Jump To: How To Library » Energy Efficiency » Energy Efficient Products & Technologies

…products such as Dow s Styrofoam SIS brand Structural Insulated Sheathing in any new building project. It contains up to 80 percent…
…combines the structural and water-resistive properties of wood sheathing and housewrap with the added benefit of insulation. It offers…

Jump To: How To Library » Green Building

…shutters in the front windows of the loft, Ryley applied a jam to the drywall. It was…
…jam was scribed on the backside before Ryley attached it to the drywall and then drilled…
…the hinges attached to the jams, Bob and Ryley lifted the shutters into place. The…

Jump To: How To Library » Windows » Shutters