BobVila.com

…directly over an ice-and-water barrier to seal the roof sheathing and protect against the elements. Synthetic underlayments…
…provides a vital second layer of protection on top of the sheathing to help keep moisture out. It is necessary for roofing manufacturers…

Jump To: How To Library » Roofing » Flashing & Sheathing

…panel joints to keep out the rain if the roof covering is lost. The Peel & Seal tape seals the joints between the TechShield sheathing panels so rain won't run between them and into the house. Peel & Seal reflects heat to keep interiors cool and to reduce…

Jump To: How To Library » Roofing » Flashing & Sheathing

…Generally speaking, shingle replacement is a straightforward…
…misgivings about conducting shingle This rubber plumbing…
…through the shingles and sheathing below. This system…
…through the roof and sheathing and hopes to hit a roof…
…removal of the damaged shingle and nail and installation…

Jump To: How To Library » Roofing » Roof

…Replace any weak material with sheathing rated for your truss or rafter…
…or 24 inch). Have the sheathing refastened using either 8d…
…over the joints between the sheathing. Four or six-inch wide…
…shingles with 6 nails per shingle or as recommended by the manufacturer…

Jump To: How To Library » Roofing » Miscellaneous Roofing Topics

…covered and ready for shingles. Ryley, Dominic, and the crew of…
…getting started is a reverse shingle, known as an under course…
…the drip edge. A finished shingle course is then placed on top…
…shingles are called a composite shingle, made of a combination of…

Jump To: How To Library » Roofing » Asphalt Shingles

…can finally prepare the roof sheathing for asphalt shingles. …
…some nasty weather. With the sheathing in place it was easier to…
…weather allowed the plywood sheathing on the roof to dry, clearing…
…consideration and spaced each shingle tightly. This will ensure…

Jump To: How To Library » Special Features » Panelized Home

…deck made of plywood, OSB sheathing, or 1x6 boards; any wood…
…ll also need four nails per shingle (six in tornado or high wind…
…made with folded pieces of shingle. If you need ridge vents…
…and ridge vents. As for the shingle type, most codes now require…

Jump To: How To Library » Roofing » Roof