get their investment back." Diane Saatchi, senior vice president of The Corcoran Group, a real estate firm based in EastHampton, Long Island, N.Y., sees the same thing in multi-million dollar rehabs. "Sometimes people overspend in ways that
actually started with a smaller diameter brad point (or spur) that leads the shaft into the hole. Two other spurs at the outeredge of the drill help keep the drill on line. The channels are usually cut deeper on brad point drills that on twist drills
s in place to form the bottom of the planter. 5. For the top trim, butt-join 1X4's flush with the planter's outeredge. Use two 6d nails at each board end. penetrating the 4X4 at one end and the 2X2 at the other. These nails can be countersunk
allowed to dry overnight. Combine the two pieces to create a rabbet to support the picture and glass. STEP 2: A table saw is combined moldings. Measure and make cuts on the face of the rabbet that supports the picture and glass. STEP 3: Glue is applied
furniture store. This is a great little project. All you have to do is add a coat of paint and then make a small mosaic on the tabletop using some ditferent size tiles. This same techniques works equally well for a larger area like this countertop as it does
approximately two feet by three and a half feet). This is perhaps the greatest single disadvantage of a portable table saw: A larger tabletop makes the tool safer and easier to use, offering more support and stability for the work piece while sawing. However, a