just be sure not to dig into the floor if hitting it with a hammer. Keep it as level and flat as possible and try to use a push pry method rather than a hammer if you can. At time that tack strip can be a pain in the palm, if you don't know what I mean
Bob visits with Leo Boudreau to learn how to recycle hardwood flooring from one room to another on a remodel project. First the floor must be salvaged. To do this a prybar is use to lift and remove the wood piece by pieces in the opposite direction of installation. Then the wood is separated in grades depending on what shape the tongue and grooves are in or if they are there at all. From an economic standpoint, if the old floor was in good shape and the homeowner likes the look it makes sense, even in Boston�s high cost labor market. Leo shows how the old flooring is installed as if it were new flooring. Ryley shows Bob how to attach two groove ends together by using a spline.
Cracked and broken bathroom tiles are easily removed and replaced. There may be water damage to the backing behind the tile, so be prepared for a longer job.
easily, it is a good idea to rest the prybar on a small piece of wood to protect Pry up the floorboards. Use a prybar to pry up the cut floorboards. Work old floorboards and nails. Use a prybar to loosen and remove old floorboards
Casement windows, windows that are attached to their frame by one or more hinges and usually have cranks, can need replacing over time due to wear and weathering. Here we replace a casement window and the shingles surrounding it.
off To remove the casings, tap a prybar into the crack between the front facing the casing away as you go. Tap a prybar into the crack between the front facing the threshold into pieces. Use a prybar to pry the rest of the center section
molding or quarter round that is in place. Use a small prybar to gently lift the molding that covers the edge of the tacks, and then lift the screen up and away. Use a prybar to lift the molding off. Step 9: Set the new screen
layer below. Follow the markings for the cut. Cut the boards for the subfloor. Step 6: Pry up the cut floorboards. Use a prybar to pry up the floorboards. Use a hammer to crack away any threshold glue. Remove any dust and dirt with