Pliers are a relatively modern invention, and it is hard to imagine what people did without this versatile tool. There are a dozen or more kinds of pliers, and your toolbox should contain at least the big three: slip joint pliers, lock joint pliers, diagonal pliers. Also handy are rib joint, water pump, needle nose, long nose, locking, and lineman's pliers. When it comes to pliers, more is better.
not for delicate ones. LOCKING PLIERS These adjustable pliers are useful as a hand-held vice or clamp. They lock firmly onto a workpiece, usually one as plier wrenches, lever-wrench pliers and by the proprietary name Vicegrips
* Adjust the pliers or channel lockpliers so that they open to the maximum. * Grab the shower head at the nut that connects it to the pipe going into the wall. * Rotate it CCW (Counter Clock wise) until it comes off. * Good luck
1/4 pop up kit from the hardware store when you go. The old one can be removed with a set of channel lockpliers (water pump pliers). Again follow the directions in the package for its installation. And do not buy a 100% plastic pop up
vise has pipe jaws...... or cut notches in edges of two sticks .....Then use a clamp (or even a bolt and nut)to tighten around the "cap" Big pair of vise grips or channel lockpliers should work too.......
fastest to repair if needed. A novice can totally rebuild it in less than 30 minutes with no more than a pair of channel lockpliers. It has the same seals, spacers and piston design of the Fleck line of controls and any dealer selling Fleck or Autotrol
fastest to repair if needed. A novice can totally rebuild it in less than 30 minutes with no more than a pair of channel lockpliers. It has the same seals, spacers and piston design of the Fleck line of controls and any dealer selling Fleck or Autotrol
included" wrench has a spade wrench to adjust the cap............You'll also need a pair of "channel-lock" pliers to remove the cap..............good instructions with the repair kit.........
anything with the right tools and a FEW GOOD BOOKS. (though I was gonna say Men didnt ya). The tools are channel lockpliers, screw drivers, and a sawzall. Get a book on plumbing by Black and Decker. They have good resources. The book will
that needs to be unthreaded from the shower arm. take two channel lockpliers and remove the swivel joint from the shower arm coming out of the wall. If this is not feasible you will have to change out the