BobVila.com

Make sure when you're using a slotted head screwdriver that you're not doing it the hard way. Here's how: Be sure you are using the right size screwdriver: the head should be approximately the width of the screw head; any wider it may do damage. The tip should fit snugly into the slot of the screw; if it's narrower, you lose power. For more leverage, try a longer screwdriver. Pre-drilling pilot holes can save work, too.

Make sure when you're using a Phillips head screwdriver that you're not doing it the hard way. Here's how: Be sure you're using the right size screwdriver: the tip should fit snugly into the screw head; if it's too small, it could mangle the head and make the screw impossible to drive. Never use slotted head drivers for Phillips head screws; you'll damage the screw and driver. For tough jobs, try a little candle wax.

For your next project, try a ratcheting screwdriver. It saves you effort by doing the work for you. Also called "yankee" or "pump" drivers, these tools are designed with spiral grooves in the shaft that operate when the handle is pushed. By switching a lever you can reverse this function for removing screws as well. Ratcheting screwdrivers also typically come with a variety of bits which make it an extremely efficient tool to have.