On location at the project house, Robert Adam from the North Bennet Street School demonstrates the tools and techniques used to handcraft reproduction moldings. Using a millwork profile found in the Winslow Crocker House, Adam uses a selection of antique hand tools to recreate the molding using century-old techniques.

Bob explains that the house being remodeled was built in 1921 and has never had a real facelift on the exterior. As a consequence, the home's trim, porch ceiling, decking, and windows were all in need of repair. Bob points out the oriel window's exterior frame that has allowed cold air into the home. To fix this problem, local carpenters were called in to tear it apart, insulate, and restructure it. Forester Molding & Lumber was then brought in to replace the 85-year-old trim. Bill Hopkins from Forester Molding & Lumber reviews how old house moldings cannot be found in lumberyards and must be replicated. Hopkins uses a needle gauge to trace the profile of the trim. The needle gauge is then placed on a piece of graph paper and traced. The profile is then used to search for available matches in the Forester catalog. If there is no match, the trim is scanned into the computer and a specialized knife is cut. The knife is then used in the machine to rip the molding.

Bob walks through the interior noting the reproduction bed molding, door molding, and rosettes that match the original moldings in this Queen Anne style home. With the kitchen cabinets and island complete, it's time to turn to lighting fixtures. bed molding, dining area, rosettes, island unit complete with paneling