Custom Moldings Intricate molding profiles were once…
…in matching existing moldings is to remove a piece of the molding or make an exact trace…
… Custom vs. Stock Moldings When comparing custom molding to "off-the-shelf…

Jump To: How To Library » Carpentry » Molding & Trim

…I want to hang crowm moldings and replace base moldings in my brick house but…
…into this and have the moulding stay. I found some crown molding in my house that were…
…ve heard of glueing up moldings, is that something to…

Jump To: Bulletin Board » Carpentry and Woodworking

…sections of millwork and moldings can keep a home's…
…feet of a particular molding profile, each unique…
…founder of Forester Moulding and Lumber, launched…
…work. Making custom moldings for every room in a…
…antique heart pine crown molding, the price of the wood…

Jump To: How To Library » Carpentry » Molding & Trim

Crown molding can do wonders for the character of a room, adding…
…expansion and contraction cracks. Many synthetic molding products, like this 4-inch plastic crown from Easy Crown Molding, look just like real wood when installed. Photo…

Jump To: How To Library » Walls & Ceilings » Walls » Wall Molding & Trim

Crown molding adds a touch of elegance to a room. Before installing…
…practice cuts to gain confidence. Step 1: Choose a molding style and measure room dimensions Choose a style of molding for the room. If possible, bring home samples to…

Jump To: How To Library » Walls & Ceilings » Walls » Wall Molding & Trim

…see you start at the basics though of "how to install crown molding" here: http://www.altereagle.com/How_to…
…crown as well as tons of info on other architectural trims & moldings. I am in the process of making a streaming video of some of…

Jump To: Bulletin Board » Carpentry and Woodworking

…post which have preassembled trim moldings on them. What I would like to do is stain the molding a dark color while leaving the post…
…without the stain bleeding from the moldings to the post without rmoving the moldings? Dan

Jump To: Bulletin Board » Carpentry and Woodworking

I am replacing the baseboard molding (2 1/4 x 9/16, colonial profile) in my house. The new molding that was delivered is not square from backside to bottom. Is this usual?? It creates a problem with cutting inside and outside corner miters…

Jump To: Bulletin Board » Fix It Forum

…apartment. The freight elevator is not nearly long or high enough. Second, how is the moulding attached to the wall? Is it nailed at the top or bottom of the moulding itself or clued somehow? Third, what does a project like this costs? I would like…

Jump To: Bulletin Board » Fix It Forum

I believe if you're going to paint the moulding it's best to do that before installing it, and better to install the molding before the carpet. After installing the molding, you'll need to touch up the paint and you don't…

Jump To: Bulletin Board » Carpentry and Woodworking