Bob meets with John Clancy who is applying "California" stucco inside the greenhouse. A tint is applied to the mix to match the interior and a latex bonding material helps keep the stucco adhear to the walls.
Bob meets with Pat Estevez to discuss exterior paint selection and application techniques. Several paint colors are being used to accent the kitchen addition. Acrylic paint is used to stand up to the harsh sun and resist mildew.
Bob reviews some of the work done on the house so far. The house was built in 1921 and the exterior stuccowalls are in good shape overall. The woodwork, however, was in bad shape as it is 80 year-old wood combined with New England winters. Most of the wood trim was repaired using western red cedar. The gutters on the gambrel roof were also replaced. The porch columns were repaired after suffering insect damage. These stone columns were filled with concrete by mason Kevin Latham. Some new stucco was added where the back door was removed and replaced with a new slider and small window. To add this stucco wall, wire lath is placed over felt paper and plywood. Then a brown coat is added and allowed to cure before the finish coat goes on. Fergus Cullen of CertaPro Painters reviews the issues involved with painting the house. Different parts of the home's exterior are older than others. The old stucco is in good shape, while the new stucco needs to be primed and painted using a couple of coats. The window uses a couple of different materials. The frame has been replaced with Azek, which does not need to be painted but will be painted to match the rest of the trim. The Azek is especially effective in areas where there is a lot of moisture and rot may be a problem. The natural wood surrounding the window will also be primed and painted to match everything else. In some areas the old paint is peeling off in sheets and "alligatoring" or creating check marks in the paint. The old paint used in these sections is likely lead paint and does not have the flexibility New England winter and summer temperature fluctuations. All the areas with chipping and peeling paint will be scraped down, the edges sanded, and then primed. When complete, the texture will be retained but there will be no chipping or peeling involved. Some shingles on the lip of the roof have sustained significant water damage. The damaged shingles are replaced and painted with a solid color stain. This stain looks like paint but penetrates into the wood. There will be a little difference in texture between the old shingles and the new, which comes with having an older home. The most important thing to remember when painting at the end of the season is overnight temperatures. Painting is possible as long as the overnight temperatures are above 35 degrees Fahrenheit. The paint must be given time to cure at the proper temperatures. Painting is also not possible during times of high humidity, which is a problem that plagues hot, humid climates in the South.
older plywood, I have patched all the seams and holes with poly fill. My question is what to use for a primer and can I use stucco for this project? I have seen a product from Behr that will do this job, but I am on a very tight buget and would prefer to
I'm not sure if it's Stucco or Plaster. I'm really new to this and have horrible wood paneling panel I discovered it was glued and nailed onto the original "stucco" walls. It's horrible underneath the wood paneling and I don't know
first floor walls and ceilings are stucco. This was part of the original build about 30 years ago. The stucco was stained or tainted. We would heard that painting the interior stuccowalls is a really bad idea. Any help